• (360) 417-0709
    info@platypusmarine.com
    Lat: 48.07.22 N, Long: 123.26.40 W

    • http://platypusmarine.wpengine.com/wp-content/uploads/2015/03/Mixer-HO-20150305-2-e1426775206513.jpg
    • http://platypusmarine.wpengine.com/wp-content/uploads/2015/03/Mixer-HO-20150305-1-e1426775149356.jpg
    • http://platypusmarine.wpengine.com/wp-content/uploads/2015/03/Mixer-HO-20150305-4-e1426775173159.jpg
    • http://platypusmarine.wpengine.com/wp-content/uploads/2015/03/Mixer-WIP-20150306-1-e1426775137680.jpg
    • http://platypusmarine.wpengine.com/wp-content/uploads/2015/03/Mixer-WIP-20150306-2-e1426775184557.jpg
    • http://platypusmarine.wpengine.com/wp-content/uploads/2015/03/Mixer-WIP-20150306-3-e1426775196266.jpg
    • http://platypusmarine.wpengine.com/wp-content/uploads/2015/03/Mixer-WIP-20150306-6-e1426775111666.jpg
    • http://platypusmarine.wpengine.com/wp-content/uploads/2015/03/Mixer-WIP-20150309-2-e1426775124445.jpg
    • http://platypusmarine.wpengine.com/wp-content/uploads/2015/03/Mixer-HO-20150305-2-e1426775206513.jpg
    • http://platypusmarine.wpengine.com/wp-content/uploads/2015/03/Mixer-HO-20150305-1-e1426775149356.jpg
    • http://platypusmarine.wpengine.com/wp-content/uploads/2015/03/Mixer-HO-20150305-4-e1426775173159.jpg
    • http://platypusmarine.wpengine.com/wp-content/uploads/2015/03/Mixer-WIP-20150306-1-e1426775137680.jpg
    • http://platypusmarine.wpengine.com/wp-content/uploads/2015/03/Mixer-WIP-20150306-2-e1426775184557.jpg
    • http://platypusmarine.wpengine.com/wp-content/uploads/2015/03/Mixer-WIP-20150306-3-e1426775196266.jpg
    • http://platypusmarine.wpengine.com/wp-content/uploads/2015/03/Mixer-WIP-20150306-6-e1426775111666.jpg
    • http://platypusmarine.wpengine.com/wp-content/uploads/2015/03/Mixer-WIP-20150309-2-e1426775124445.jpg

    Mixer – Anti-fouling Paint

    Mixer, a 106 foot Nordland Motor Yacht was hauled out at Platypus Marine Shipyard located in pacific northwest’s Port Angeles Washington. During the vessels time at Platypus Marine she received two coats of Shark  Skin Bottom paint applied to the hull of the boat.  The zincs were also inspected and any touch ups on the topcoat were made accordingly. The Vessel was then launched into the Puget Sound on her next adventure.